DIY Reupholstery

Upholstery Terminology: A Glossary of Furniture Upholstery Terms

A plain-language glossary of furniture upholstery terms, from webbing and welt to gimp and pattern repeat, plus the easily confused pairs explained.

On this page
  1. Frame and support terms
  2. Padding and cover terms
  3. Edge and trim terms
  4. Fabric and pattern terms
  5. Styling terms
  6. Recover versus reupholster
  7. Easily confused pairs
  8. Frequently asked questions

Upholstery has its own vocabulary, and the same part can have different names in different shops or countries. Knowing the terms helps when you read a quote, shop for a sofa, or talk to an upholsterer. This glossary groups the terms by what they describe. For the parts of a sofa in context, see the sofa parts guide.

Frame and support terms

  • Show wood: exposed frame, usually polished or finished wood, that is not covered by fabric. Dining chairs and occasional chairs often have show wood.
  • Kiln-dried hardwood: wood dried in a kiln to reduce moisture, which helps keep a frame from warping or cracking. Better frames use kiln-dried hardwood. Cheaper frames may use plywood or particleboard.
  • Webbing: strips of jute or elastic, interlaced across the frame as a base for the springs or cushion.
  • Sinuous springs: S-shaped wire springs, also called no-sag or zig-zag springs, that support the seat.
  • Eight-way hand-tied springs: coil springs tied together with twine in eight directions, for even support.
  • Deck: the platform under loose seat cushions. It is covered in deck fabric, which is often cheaper than the outer cover.
  • Burlap: jute fabric stretched over the springs to hold the padding in place. Also called hessian in some regions.

Padding and cover terms

  • Cushion core: the foam or fill inside a cushion. Some cores are foam, some are foam wrapped in down or fiber.
  • Dacron wrap: polyester batting wrapped around a foam core to soften the edges. Dacron is a brand name that is often used generically.
  • Muslin: a plain cotton undercover applied before the final fabric. It smooths the surface.
  • Dust cover, or cambric: a black nonwoven fabric stapled to the underside. It is a dust barrier, not decoration.
  • Stretcher: cheaper fabric sewn to hidden parts of a cover to save the top fabric.

Edge and trim terms

  • Welt, or piping: fabric-covered cord sewn into a seam. A double welt is two cords side by side, often glued over the staples at show wood.
  • Gimp: a decorative flat braid glued or tacked over raw edges and staples.
  • Tack strip: a cardboard strip used to make a straight, hidden edge, such as the top of an outside back.
  • Ply-grip or curve-ease: a metal, toothed strip used to close the side edges of a cover.

Fabric and pattern terms

  • Pattern repeat: the distance before a motif repeats, measured vertically and horizontally. Larger repeats need more yardage.
  • Railroading: running the fabric’s length across the width of the piece, so that wide pieces can be cut without a seam. It is not the same as cutting on the bias.
  • Nap: the direction of pile or sheen, such as on velvet. Pieces usually need to be cut in the same direction.
  • Double rubs (Wyzenbeek) and Martindale cycles: abrasion tests that show how durable a fabric is. More rubs or cycles mean more wear resistance.
  • Performance fabric: stain-resistant, durable fabric designed for busy use.
  • COM: customer’s own material, which is fabric you supply to the upholsterer.

Styling terms

  • Tufting and buttoning: pulling fabric into a pattern with buttons. Tufting usually refers to buttons pulled into the padding in a diamond grid.
  • Channeling: vertical stuffed channels in the back or seat.
  • Tight back versus loose back: a tight back is smoothly upholstered with no separate cushion. A loose back has removable back cushions.
  • Slip seat: a removable seat, often a dining chair seat that is held in place by screws.
  • Skirt: the fabric panel around the base of a piece.
  • Kick pleat: a pleat in the skirt at a corner.
  • Rolled arm: an arm that curves outward at the top.

Recover versus reupholster

Recovering replaces only the outer fabric. Reupholstering takes the piece down to the frame to rebuild the padding, springs and covers. For a deeper look at the difference, see can you reupholster over existing fabric.

Easily confused pairs

  • Cording versus welt. Bare cord is cording. Welt, or piping, is cord covered in fabric.
  • Gimp versus double welt. Both hide staples, but they look different. Gimp is a decorative braid. Double welt is covered cord.
  • Railroading versus bias cutting. Railroading runs the fabric across the width of the piece. Bias cutting runs it at a 45-degree angle.
  • Cambric versus decoration. Cambric is a dust barrier on the underside. It is not a decorative fabric.

Frequently asked questions

What defines upholstery? Upholstery is the padding, springs, webbing and covering applied to furniture and seats. The upholstery items guide covers the types of pieces this includes.

What do you call upholstery with buttons? The usual terms are tufting or buttoning. In float buttoning, the button sits on the face of the cover. In deep buttoning, the button is pulled into the padding and forms a pleated diamond.

The complete guide to diy reupholstery

How to Reupholster Furniture: A Complete DIY Guide
Read the guide

Keep exploring

Guides from other topics

All topics →