The best way to learn upholstery is to start with small pieces where a mistake costs little. This guide lists practice projects in a rough order of difficulty, with the skills each one builds. It also covers fabric choices for practice and a few ideas for making small items from fabric swatches.
For the full method behind these projects, see the complete guide to reupholstering furniture.
Start with a drop-in dining seat
A drop-in dining seat, also called a slip seat, is the easiest first project. It is usually held in place by four screws underneath, so you can take it off the chair and work on it at a table. A seat takes about an hour once you know the steps.
It teaches the basics: stripping the old cover, checking the foam and batting, centering the fabric, folding corners into neat pleats, and attaching a dust cover. You need about half a yard of fabric per seat, and one yard often covers two seats. Typical material costs are roughly $10 to $40 per seat, depending on the fabric.
Thrift-store or curbside chairs make low-risk practice pieces, as long as the frame is sound.
Footstools and bench tops
Footstools and bench tops use the same skills as slip seats, with longer edges and sometimes leg cut-outs. They are a good second project because they add a little more fabric and more corners to manage.
A box cushion with zipper and welt
A simple box cushion with a zipper and welt builds sewing skills before you move to chairs. You will practice straight seams, boxing strips and attaching welt. The tools guide covers the machines that make this easier.
A rectangular ottoman
A rectangular ottoman adds box corners or a sewn boxed cover, which teaches you more about corner folds. For the full steps, see the ottoman guide.
An upholstered headboard
A headboard is a good project for practicing larger, flat surfaces. A typical build uses a plywood board, two to three inches of foam, batting and fabric. A queen headboard is about 62 to 64 inches wide, slightly wider than a 60-inch mattress, so measure the bed before you cut the board.
Next step: a dining or side chair with a padded back
Once you can manage a slip seat and a footstool, a dining or side chair with a padded back is a sensible next step. It adds a curved or angled back and more pulling and stapling.
Projects to leave for later
Some projects are harder for beginners and are best left until you have more practice:
- Sofas. Yardage, number of pieces and fabric waste make mistakes costly.
- Channel backs and deep tufting. These add many steps and fabric.
- Curved or barrel backs. The fabric has to fit a shape with no straight lines.
- Recliners. Their mechanism and sewn panels make them one of the harder DIY jobs.
Armchairs, wingbacks and Chesterfield-style pieces usually come after you have built several simpler pieces.
Choosing fabric for practice
Medium-weight solid fabrics and small random prints are the easiest to work with. Stripes and plaids need careful alignment, and every misalignment shows. Velvet shows nap marks and can mark easily when stapled. Leather and vinyl have no forgiveness for staple holes.
Thin, cheap fabric is not a good practice choice either. It shows every lump and staple, so it can be harder to judge your work.
Using fabric swatches for small crafts
If you have leftover upholstery fabric samples, you can make small items that use the same cutting and sewing skills. Common ideas include:
- Zippered pouches and clutches. Sturdy swatches make structured pencil cases and cosmetic bags.
- Patchwork totes. Sew mixed swatches into a heavy-duty bag.
- Storage baskets and organizers. Cut and sew heavy swatches into small bins.
Before you sew, remove any backing or staple holes. Warming paper backing with an iron can help it peel away cleanly. Add fusible interfacing or fleece for structure, and zigzag or overlock raw edges to stop fraying on heavy weaves.
Safety
Wear eye protection when you remove old staples. Staples and tacks can fly when they release, and the points are sharp.