DIY Reupholstery

What are different parts of a sofa called?

A plain-language guide to the main parts of a sofa, from visible arms, backs and seats to the frame, springs, deck, filling, welt, skirt and base.

On this page
  1. Visible exterior parts
  2. Arm styles
  3. Back styles
  4. Seat styles
  5. Frame and suspension
  6. Cushion filling and ticking
  7. Trim and details
  8. Sectional and chaise terms
  9. Which parts matter when reupholstering
  10. Frequently asked questions

A sofa is made of three layers. The visible exterior parts are the arms, back, seat cushions, legs or base, and any skirt. The frame and suspension sit underneath: the wood frame, the springs or webbing, and the deck. The padding and trim finish the piece, with cushion filling, ticking, welt and a dust cover on the underside.

Visible exterior parts

  • Arms: the side supports. They come in several shapes, listed below.
  • Back: the backrest. It can be attached, loose, tight or pillow-style, listed below.
  • Seat and cushions: the seating surface. It may be separate cushions, a single bench cushion, or a tight seat. Cushion edges are often finished with boxing, which is the side panel of a cushion, and welt, which is corded seam trim.
  • Legs, feet or base: the bottom supports. These can be bun, turned, tapered or block legs, or a solid plinth base.
  • Skirt: a fabric panel around the base, often with kick pleats at the corners.

Arm styles

  • Rolled arm: a common traditional shape that curves outward. It is comfortable for lounging, but it takes up extra space.
  • English arm: low and set back from the front edge of the seat. It has a low profile and does not project past the body, which suits small rooms.
  • Square or track arm: also called a box arm. It has straight lines and a modern look, and it can serve as extra seating.
  • Tuxedo arm: slightly flared, and the same height as the back.
  • Pleated arm: the front of the arm is upholstered in fabric continued from the inside.

“Lawson” is used both as a sofa style (separate back cushions, with arms lower than the back) and loosely as an arm shape. Sellers do not use the name consistently, so check what a specific seller means.

Back styles

  • Attached back: cushions that are fastened, clipped or sewn to the back so they stay in place.
  • Loose-cushion back: separate back cushions that can be removed, which makes covers easier to clean.
  • Pillow back: more pillows than seat cushions, for a softer feel. It needs more upkeep to keep the pillows in place.
  • Tight back: smoothly upholstered, with no separate cushions. It looks firm, tailored and formal.
  • Camelback: raised in the middle and sloping lower at the ends.
  • Channel back: deep vertical grooves on a tight back.
  • Waterfall back: two or more layers of gathered cushions attached to the back.
  • Curved back: the back curves around and forms one piece with the arms.

Seat styles

  • Cushioned seat: two or three cushions, usually firmer than back cushions.
  • Single-cushion seat: one long cushion, sometimes called a bench seat. It looks tidy and suits a pillow back.
  • Tight seat: no separate seat cushions. It is common on formal sofas and those with wood frames.

Frame and suspension

These parts sit under the fabric and determine how long the sofa lasts.

  • Frame: the sofa’s skeleton. Better frames use kiln-dried hardwood. Cheaper frames may use plywood or particleboard. Rails and corner blocks reinforce the joints.
  • Deck: the platform directly under the seat cushions. It is the surface the cushions sit on, not the cushion itself.
  • Springs: sinuous springs, which are S-shaped wires, or eight-way hand-tied springs, which are coils tied together with twine running in eight directions.
  • Webbing: strips of jute or elastic woven across the frame. It is used in place of springs in some sofas and alongside them in others.

Cushion filling and ticking

Cushion cores can be foam, down, polyester fiber, or a mix of spring and down. Ticking is the tightly woven inner casing that keeps feathers or fiber from working through to the outside.

Trim and details

  • Welt, or piping: corded trim along the seams.
  • Dust cover, or cambric: black fabric stapled to the underside.
  • Throw pillows: decorative cushions. They are separate from the back cushions.
  • Arm caps: removable covers that protect the tops of the arms.

Sectional and chaise terms

  • L-sectional: two sofa-like sections joined at a corner.
  • Chaise sectional: half a sofa and half a chaise.
  • Two-chaise sectional: a chaise piece at each end.
  • One-arm piece: a piece with one arm, because the other side joins another section.
  • Armless piece: a seat added between two sections to make one side longer.
  • Modular: pieces about the size of a single seat that can be rearranged.

For more terms, see the upholstery terminology glossary.

Which parts matter when reupholstering

Reupholstering a sofa follows the reverse order of how it was built. Outside pieces come off first, then the seat and deck, and you finish by inspecting the frame and springs. The complete guide to reupholstering furniture walks through that order.

Frequently asked questions

Is it a sofa or a couch? People often use the words interchangeably. A sofa is generally considered more formal, with a higher back and more structured design. A couch is often softer and used more for lounging. Where the piece sits in the home can also affect which word people use.

Can I replace parts of my couch? Pillows are the easiest to replace. Other parts depend on the make, model and warranty. If a part cannot be replaced and you do not want a new couch, reupholstering is an option.

The complete guide to diy reupholstery

How to Reupholster Furniture: A Complete DIY Guide
Read the guide

Keep exploring

Guides from other topics

All topics →