DIY Reupholstery

Can you just reupholster over existing fabric?

Can you just reupholster over existing fabric? Yes for simple pieces with clean, sound old fabric, but stripping to the frame is usually the better choice.

On this page
  1. When covering over can work
  2. When to strip to the frame instead
  3. Problems with an extra layer
  4. If you cover over anyway
  5. Does new fabric seal in odors or allergens?
  6. Alternatives
  7. Frequently asked questions
  8. Safety

Yes, you can reupholster over existing fabric on some simple pieces, as long as the old fabric is clean, thin, tight and free of odor, and the padding underneath is still sound. It is rarely the best choice, though. Covering over hides problems in the frame and springs, and it adds bulk. For most pieces, stripping to the frame gives a better result.

When covering over can work

Covering over is most reasonable when all of these are true:

  • The frame, springs and padding are firm, even and undamaged.
  • The old fabric is clean, with no stains, grease, odor, mold or mildew.
  • The old fabric is thin and tight, with no heavy texture.
  • The piece has a simple shape, such as a slip seat or a footstool.
  • You want a quick, low-cost refresh and accept some extra bulk.

A dining seat or a footstool with a flat top is the usual example. These pieces have few corners and little bulk to hide.

When to strip to the frame instead

Strip the piece to the frame if any of these apply:

  • Stains, grease or heavy odors. These can bleed through the new fabric or linger in the padding.
  • Mold, mildew or pests. Do not cover them. Strip the piece and dispose of the old materials.
  • Pet urine. It soaks into the padding and is hard to remove.
  • Flattened or crumbling foam. A new cover does not fix worn padding.
  • Thick, textured or tufted old fabric. It can show through as lumps or ridges.
  • Loose cushions. These usually need new sewn covers, not stapling over.
  • Curves or complex shapes. Extra layers add bulk that spoils the fit.

Professional upholsterers normally strip to the frame. That lets them inspect the joints, springs and webbing, which you cannot see under a new layer. For the full method, see the complete guide to reupholstering furniture.

Problems with an extra layer

  • Bulk. Each layer adds thickness at corners, seams and show-wood edges.
  • Hidden wear. A cover-over hides sagging webbing, crumbling foam and loose joints. These problems keep getting worse under the cover.
  • Show-through. Dark or busy old fabric can show through light or thin new fabric.
  • Old staples. Loose staples under the new fabric can poke through or snag it.

Covering over does not save money if the lumps force you to redo the job.

If you cover over anyway

  1. Check the padding first. Press on the seat and back. If the foam is flattened, replace it before you cover anything.
  2. Flatten or pull loose staples. Wear eye protection while you do this.
  3. Test for show-through. Hold a sample of the new fabric over the old fabric in daylight. If the old pattern or color shows through, choose a heavier or darker fabric.
  4. Smooth with thin batting. A thin layer of polyester batting can soften minor texture. Keep it thin, because extra padding adds bulk.
  5. Keep the corners simple. Fold them into neat pleats and trim the bulk.

Does new fabric seal in odors or allergens?

No. A new cover does not seal in odors, allergens or dust. If the old padding or fabric is contaminated, it has to be removed rather than covered.

Alternatives

  • Fitted slipcovers. A fitted slipcover covers the piece without stapling. Many can be removed for cleaning, depending on the cover.
  • Replacing only the damaged panels. If one arm or back panel is worn out, you can unstaple and replace that panel instead of the whole piece.

Frequently asked questions

Is covering over faster? On a simple piece, such as a footstool, it can be. On a complex chair, the bulk and fit problems often make the job take longer overall.

Should I strip the old fabric first? Usually, yes. Stripping lets you see the frame and springs, and it gives you a clean base for the new fabric. The tear repair guide covers damaged fabric that you might be deciding whether to keep.

Safety

If you suspect pests, deal with them before any work begins. Wear eye protection when you pull or flatten old staples, and wear a dust mask when you disturb old padding.

The complete guide to diy reupholstery

How to Reupholster Furniture: A Complete DIY Guide
Read the guide

Keep exploring

Guides from other topics

All topics →