Start here
Types of Upholstery Techniques Explained
A guide to the main upholstery techniques: springs and webbing, foam and batting, tight versus loose seats, corners, piping, tufting and finishing.
Build and Technique
Corners, tufting, piping, boxed cushions, tight backs and no-sew fabric methods.
Start here
A guide to the main upholstery techniques: springs and webbing, foam and batting, tight versus loose seats, corners, piping, tufting and finishing.
Can you teach yourself upholstery? Yes. Start with a practice piece and a sound frame, learn from books and videos, then work up from a drop-in seat.
DIY fabric-covered furniture without sewing: pick sturdy fabric, staple the centres first, allow 3 to 4 inches to wrap, and cover seats and footstools.
Glue fabric to wood with spray adhesive, contact cement or diluted PVA. Prep the wood, test on scrap first, and staple seats and stress points.
How to decoupage with fabric on furniture: pick thin cotton, prep the base, glue the fabric with Mod Podge, smooth it flat, then seal with topcoats.
How to do button tufting on upholstered furniture: plan the grid, cut holes in the foam, allow extra fabric for depth, then set each button with twine.
Step-by-step upholstery corners: staple each centre first, pull the tip over the corner, fold a single or double pleat, then trim the excess and staple.
How to fold a corner when upholstering: staple the sides first, pull the tip over, trim the excess to about 1/2 inch, then tuck a single or double pleat.
How to make a boxed cushion cover for furniture: measure the foam, cut the boxing with 1/2 inch seams, set a back zipper, then slide in the foam.
How to make and attach piping for upholstery: cut bias strips about 1.5 inches wide, join them, sew around the cord, then stitch it into the seam.
How to make corners pointy when sewing: pivot with the needle down, clip about 1/8 inch from the stitching, trim the bulk, and turn the corner out.
How to reupholster a chair seat with rounded corners: bevel the foam, stretch the fabric from the centres, and make small even pleats at each curve.
How to upholster a tight back on a chair: choose the support, build the layers, set the grain, allow stuff-in and fit muslin before the top fabric.
How to upholster a wingback chair: strip in reverse order, repair the frame, rebuild the inside pieces first, then finish the wings, arms and outside back.
How to fold and pleat leather upholstery corners: skive the fold, trim with care, and fasten with fine staples. Staple holes in hide are permanent.
Upholstery inside corners: make a small Y-cut, tuck the flaps around the post, allow stuff-in fabric and staple them down for a smooth fit with no bunching.
Related topics