Upholstery Fabrics

Upholstery Fabric Guide: Choosing Material for Furniture

A practical guide to upholstery fabric: how durability is rated, which fibers suit each room, yardage, and where to buy samples before you order.

On this page
  1. Quick answer
  2. How upholstery fabric is rated
  3. Fiber families
  4. Match the fabric to how you live
  5. Grades and price
  6. How much fabric to buy
  7. Buying and sampling
  8. Refreshing fabric you already own
  9. Fire safety
  10. Common misconceptions
  11. Buying checklist

Quick answer

Choose upholstery fabric by how the furniture will be used, then check four specs on the label: fiber content, rub count, cleaning code, and pattern repeat. A grade letter or a high price says little about durability on its own.

How upholstery fabric is rated

Durability: rub count

Two tests are common. Wyzenbeek is the US test and counts double rubs (ASTM D4157). Martindale is the European test and counts cycles (ISO 12947 / ASTM D4966). The two results cannot be converted into each other.

As a rough guide for Wyzenbeek:

  • About 3,000 double rubs is light or decorative use.
  • About 9,000 to 15,000 is general residential use.
  • 15,000 or more is heavy-duty residential or contract use.
  • 30,000 or more is heavy-duty commercial use.

For Martindale, a rough guide is about 10,000 for decorative use, 15,000 to 25,000 for domestic use, and 25,000 to 30,000 or more for heavy domestic or commercial use.

Suppliers draw these lines in different places, so treat the bands as guides. Very high rub counts add little for home use. Weave and fiber matter too.

Cleaning code

The cleaning code tells you which cleaners are safe. W means water-based cleaners. S means solvent only. W/S means either. X means vacuum or brush only. The code is separate from the fabric’s grade and durability.

Pilling and lightfastness

Pilling is rated on a 1 to 5 scale, and a class of 3 or higher is generally considered acceptable for upholstery. Lightfastness is also tested. Contract upholstery is typically tested to 40 hours under AATCC 16, and solution-dyed acrylics rate far higher.

Fiber families

Natural fibers

  • Cotton. Soft and breathable, but it stains, wrinkles, and fades. It is often blended with polyester.
  • Linen. Strong and cool, but it wrinkles and stains. Read our linen upholstery guide before you choose it for a busy room.
  • Wool. Resilient, naturally flame-resistant, and resistant to soiling.
  • Silk. Luxurious but fragile, and it fades in sun. Best for formal, low-use pieces.
  • Leather. Durable, and it ages well. It needs conditioning, and scratches show. Leather is not pet-proof, because claws can mark it.

Synthetic fibers

  • Polyester and nylon. Strong abrasion resistance. They are often blended for extra strength.
  • Olefin (polypropylene). Resists moisture, stains, and fading. It is common in both indoor and outdoor fabric.
  • Acrylic. Solution-dyed acrylic is strongly fade-resistant and is widely used outdoors. See our outdoor fabric guide.
  • Microfiber. A dense, fine-fiber fabric, usually polyester. It wipes clean and suits busy homes. See our microfiber guide.
  • Vinyl and polyurethane (PU). Faux leather. Vinyl wipes clean well. PU peels sooner than quality vinyl.

Semi-synthetic fibers and blends

Rayon (viscose) and acetate are soft and lustrous, but they are weak when wet. Blends such as cotton-polyester or linen-viscose trade some feel for durability, and the blend ratio matters.

Weave and construction

Tight weaves wear better than loose weaves or long floats. Flat or low-pile weaves resist snagging better than loops or open textures. For the full list of weaves and constructions, see what are the different types of upholstery fabric. Velvet is a pile construction, not a fiber, and its care is different. See is velvet good for upholstery.

Match the fabric to how you live

  • Busy family room, kids, or pets. Look at microfiber, performance fabrics, and tight synthetic weaves. Our pet-friendly guide covers the details.
  • Dining chairs. Vinyl, leather, performance fabric, or a tight synthetic weave suit most seats. See the best material for dining chair seats.
  • Formal or low-traffic rooms. Silk, linen, and velvet look good here. They stain, fade, or bruise more easily, so keep them out of high-traffic spots.
  • Outdoor cushions. Solution-dyed acrylic or olefin is usually the best choice. Water-resistant is not waterproof, so check the spec.

Grades and price

A fabric grade is a manufacturer’s price tier. It is not a universal quality rating, and grades can’t be compared between brands. Read our guide to upholstery fabric grades for what a grade does and does not tell you.

How much fabric to buy

Estimates for 54-inch plain fabric are below, and the upholstery yardage chart has a fuller breakdown. Treat them as guides and confirm with the maker or your upholsterer.

Piece Approximate yards
3-seat sofa 14 to 18
Loveseat 10 to 12
Armchair 5 to 8
Wingback 7 to 8
Ottoman 2 to 3
Dining seat about 0.5

Add 10 to 25 percent for large pattern repeats or matching stripes and plaids. Standard width is 54 inches, but some railroaded goods run 110 to 118 inches.

Buying and sampling

  • Order a sample or memo cutting first. Check the color, hand, and weight in your room’s light.
  • Buy all the yardage at once from one dye lot. Later orders may not match.
  • Check the listed specs before you buy: fiber content, width, double rubs, cleaning code, and pattern repeat.

For where to find samples and specs, see where to buy upholstery-grade fabric.

Refreshing fabric you already own

Fire safety

Fire-safety rules for upholstered furniture differ by country, and they can depend on whether the piece is for sale. In the US, the federal rule for residential upholstered furniture is 16 CFR 1640. In the UK, the Furniture and Furnishings (Fire) (Safety) Regulations 1988 apply. Painted or treated fabric may not perform the same as the original. Check your local rules before you reupholster a piece you plan to sell.

Common misconceptions

  • Very high rub counts rarely matter at home. Weave and fiber matter too.
  • Upholstery grade letters are price tiers. They are not durability ratings.
  • Drapery and apparel fabric are not substitutes. They are usually too light and loosely woven.
  • Performance fabric is stain-resistant, not stain-proof. Blot spills quickly.
  • Leather is not pet-proof. Claws scratch it.

Buying checklist

  • How the piece will be used, and by whom
  • Rub count, and which test was used
  • Cleaning code
  • Fiber content and any stain or water treatment
  • Pattern repeat and yardage
  • A sample tested in your room

Keep exploring

Guides from other topics

All topics →