Upholstery Fabrics

How to Scotchgard Furniture Yourself

Protect furniture fabric yourself: clean and test first, spray light coats, and reapply after deep cleaning. Learn what protectors can and can't do.

On this page
  1. Quick answer
  2. What a fabric protector does
  3. Check the cleaning code and materials first
  4. What you will need
  5. Step by step
  6. How much is too much
  7. How often to reapply
  8. Common mistakes
  9. Keep pets and children off until it is dry
  10. Safety
  11. Formulas change

Quick answer

You can apply a fabric protector to most upholstery yourself. Clean the piece first, check the cleaning code, and test a hidden spot. Then spray two light coats in a ventilated room and let them dry fully. A protector makes fabric stain-resistant, not stain-proof, and it does not make fabric waterproof. Reapply it after deep cleaning.

What a fabric protector does

  • Helps repel spills. Water and many liquids bead on the surface longer, which gives you time to blot them up.
  • Does not make fabric stain-proof. Spills still need prompt attention.
  • Does not make fabric waterproof. Heavy or prolonged wetting can still soak through.
  • Seals in existing dirt. Clean the fabric before you treat it.
  • Wears off. Factory protection does not last forever, and deep cleaning removes protection.

Check the cleaning code and materials first

Most fabric protectors are intended for fabrics with W, S, or W/S cleaning codes. Check the cleaning code on the tag, then check the product label for excluded materials. Leather, suede, vinyl, plastics, and some silks are commonly excluded.

What you will need

  • A vacuum with an upholstery brush
  • A fabric protector, such as 3M Scotchgard Fabric Water Shield (an aerosol), or another product made for upholstery
  • A clean white cloth for spot cleaning
  • A drop cloth to protect the floor
  • Good ventilation

Step by step

  1. Vacuum the piece thoroughly. Clean any stains first, and let the fabric dry completely.
  2. Test the protector on a hidden area, such as the underside of a cushion or the back of a sofa. Let it dry.
  3. Check the test. Water should bead on the surface instead of soaking in. If it soaks in, the protector may not be working on that fabric.
  4. Shake the can well. Hold it about 6 inches from the fabric, or at the distance printed on the label.
  5. Spray a light, even coat that dampens the fabric without soaking it. Overlap each pass slightly.
  6. Let the first coat dry, then apply a second light coat. Two light coats work better than one heavy coat.
  7. Treat every exposed part of the piece: cushion fronts and backs, arms, and the top of the seat deck. Zippered cushions need every exposed face treated.
  8. Let the piece dry for several hours. Drying time varies with humidity, so allow longer, and check the label before heavy use.

Coverage varies by can. A full sofa may need more than one can.

How much is too much

More product is not better. Too much protector can leave rings or stiffness. If you see rings, let the fabric dry fully before you decide what to do next.

How often to reapply

Reapply after deep cleaning or shampooing. Many people reapply every six to 12 months, but the schedule varies with the product and how the furniture is used.

Common mistakes

  • Skipping the cleaning. The protector seals in dirt, so clean the fabric first.
  • Applying too much in one pass. Heavy coats can ring and stiffen the fabric.
  • Treating a material the label excludes. Leather and vinyl are common examples.
  • Expecting it to fix old stains. A protector helps with new spills. Set stains are not reversed.
  • Skipping the blotting. Protection buys time, but it does not replace prompt cleaning.

Keep pets and children off until it is dry

Keep pets and children off the treated piece until it has dried fully. Stain-resistant treatments wear off over time, so reapply as needed. For fabrics that suit pets, see our pet-friendly fabric guide.

Safety

  • Spray in a well-ventilated area, and avoid breathing the mist.
  • Aerosol is flammable. Keep it away from flames and pilot lights.

Formulas change

Product formulas change over time, so check the current label before you buy and follow it. The label sets the spray distance, drying time, and excluded materials.

If you want to change a fabric’s color rather than protect it, see fabric paint for sofas. For the fabric choice itself, start with the upholstery fabric guide.

The complete guide to upholstery fabrics

Upholstery Fabric Guide: Choosing Material for Furniture
Read the guide

Keep exploring

Guides from other topics

All topics →