Cost and Yardage

Upholstery Yardage Chart: How Much Fabric for Each Piece

How much fabric each piece needs, from a drop-in dining seat to a sectional, with allowances for pattern repeats. Based on 54-inch plain upholstery fabric.

On this page
  1. Yardage by piece
  2. Add for extras
  3. Add for pattern repeats
  4. Fabric width
  5. Railroading and leather
  6. Common misconceptions
  7. Related guides

Most furniture yardage charts assume plain upholstery fabric that is 54 inches wide. On that basis, a dining chair seat and back needs about 1 to 1.5 yards, and a standard sofa needs about 14 to 18 yards. Use the chart below as a starting point, then add allowances for patterns and extras.

Yardage by piece

Figures are for plain fabric, 54 inches wide.

Piece Yards
Drop-in dining seat 0.5 to 0.75
Dining chair, seat and back 1 to 1.5
Small ottoman 1 to 2
Large ottoman 3 to 4
Slipper chair 4 to 5
Club or wingback chair 6 to 8
Recliner 7 to 8
Chaise lounge 8 to 10
Loveseat 10 to 12
Standard sofa (6 to 7 feet, 3 cushions) 14 to 18
Sectional 20 to 30 or more
Queen headboard 2 to 3

Ottoman estimates vary more than the chart suggests. A simple small ottoman may need 1 to 2 yards, but some shop guides list about 4 to 5 yards for ottomans under roughly 36 by 24 inches. Measure yours before you order.

For dining chairs, one yard of 54-inch fabric often covers two standard drop-in seats, depending on seat size. Chairs with taller or fully upholstered backs need more than the seat-and-back figure, so check with your upholsterer.

Four seat-and-back dining chairs need about 4 to 6 yards of plain fabric before any pattern allowance.

Add for extras

  • Skirts: add about 2 to 4 yards.
  • Self-welting: add about 1 to 2 yards.
  • Loose back cushions and extra pillows: most piece charts don’t include these, so measure them separately.

Add for pattern repeats

Patterned fabric needs extra yardage so the design lines up at the seams. A general rule is to add 10 to 25 percent. Large repeats can need more. One upholstery shop’s published guide adds 10 percent for repeats of 3 to 14 inches, and rises in steps to 35 percent for repeats of 44 to 51 inches.

Fabric width

Upholstery fabric is usually 54 inches wide. Narrower fabric needs more yardage because fewer panels fit across the roll. Quilting and apparel fabric is often 42 to 45 inches wide, and those widths don’t match upholstery charts. Check the width on the bolt before you calculate.

A yard is 36 inches. To convert a measured length in inches to yards, divide by 36.

Railroading and leather

Turning the fabric 90 degrees, called railroading, can avoid seams on wide pieces such as sofa backs and seats. It changes the yardage, so recalculate before you order.

Leather is sold by the hide or square foot, so fabric yardage doesn’t convert to it cleanly. Ask your upholsterer for a hide estimate.

Common misconceptions

  • “The chart is exact.” It’s a starting point. For a firm number, measure each panel.
  • “Any fabric works the same.” Width, nap and pattern all change how much you need.
  • “I can order more later.” Dye lots can differ, so buy the full amount at once.

The complete guide to cost and yardage

Upholstery Cost: Pricing Chart for Reupholstering Furniture
Read the guide

Keep exploring

Guides from other topics

All topics →