A high-density seat cushion cut to size usually costs about $30 to $80. A 2-inch high-density sheet about 24 by 72 inches usually runs about $40 to $100. Prices vary by supplier, grade and cut size, and some suppliers list lower prices for the same size.
Foam prices at a glance
| Item | Typical US price |
|---|---|
| Dacron wrap, per cushion | $5–$20 |
| High-density seat cushion, about 24 × 24 × 4 to 5 in, cut to size | $30–$80 |
| 2-inch high-density sheet, about 24 × 72 in | $40–$100 |
| Professional foam replacement, installed, per cushion | $50–$200 |
Specialty foams cost more. High-resilience foam costs more than high-density foam, and natural latex often costs two to three times as much as high-density polyurethane. Small craft cuts for DIY projects cost much less than seat-cushion sizes.
Density, firmness and thickness
These three measures are easy to confuse:
- Density (pounds per cubic foot) indicates durability. Roughly 1.2 is low, 1.5 is medium, 1.8 to 2.0 is high-density, and 2.5 or more is high-resilience.
- Firmness is measured as ILD or IFD, the force needed to indent the foam. Roughly 20 to 25 is soft, 30 to 35 is medium, and 40 to 50 or more is firm.
- Thickness sets the depth of support. Seat cushions are often 4 to 6 inches thick, and dining chair seats often use 1 to 2 inches.
Density is not firmness. Check both before you order, and ask the cutter what they recommend for your piece.
For a seat cushion, high-density foam is the usual choice, often 1.8 density or higher, in the firmness range that suits the piece. Back cushions are often softer.
What drives the price
- Size and thickness: thicker cores and larger sheets cost much more.
- Density and firmness: higher density costs more but lasts longer.
- Foam type: standard polyurethane is the least expensive. High-density, memory, latex, outdoor-rated and fire-retardant foams cost more.
- Cutting: cut-to-size services may charge extra for odd shapes or beveled edges.
- Quantity: bulk or pallet orders can run to $2,000 or more.
Memory foam and latex
Memory foam is usually used as a top layer over a supportive base, not as a whole seat cushion. It recovers slowly and can soften with heat. Latex is more expensive than high-density polyurethane, and its price varies widely by grade.
How long foam lasts
Foam life varies with use and quality. Low-density foam often lasts about 2 to 5 years. High-density and high-resilience foam often lasts 7 to 15 years.
Cheap low-density foam isn’t a saving if it flattens within two or three years, because you’ll pay for replacement sooner.
When only the foam needs replacing
If the frame and springs are sound and only the cushions are flat, replacing the foam may be all the piece needs. Installed foam costs about $50 to $200 per cushion, far less than a full reupholstery. For the other signs to check first, see when to reupholster furniture.
For cushion foam costs on large pieces, the sectional sofa cost guide covers the per-cushion figures in context.
Safety
- Polyurethane foam is highly flammable. Store it away from heat and open flames.
- Wear a dust mask when cutting or sanding foam.