Cost and Yardage

DIY vs Professional Reupholstering: What Each Really Costs

Compare the real costs of DIY and professional reupholstering, including tools, materials, time, and mistakes, and when a pro makes the most sense.

On this page
  1. Tool costs
  2. Materials
  3. Time
  4. Good DIY projects and jobs for a pro
  5. Common reupholstering mistakes
  6. Is DIY cheaper?
  7. Safety

A DIY dining seat can cost about $10 to $40 in materials, while a professional sofa job often runs $800 to $2,000 in labor before fabric. The real comparison includes tools, your time, and the cost of mistakes. DIY can save money on the right project, but it usually costs more time than people expect.

Tool costs

Tool Typical cost
Basic toolkit (staple gun, staple remover, shears, webbing stretcher, curved needles, tack hammer) $50–$200
Pneumatic stapler $40–$150
Small air compressor (if you use a pneumatic stapler) $100–$200
Upholstery shears $20–$60
Electric carving knife for foam $20–$40
Walking-foot sewing machine (for boxed cushions and welting) $500–$1,500 or more, used

A home sewing machine usually struggles with several layers of upholstery fabric and welting. Boxed cushions and welted seams need a heavy-duty machine.

Tool costs spread across several projects. A one-off DIYer may save less than the tool list suggests.

Materials

DIY materials are often the same as professional materials: fabric, foam, Dacron batting, welt cord, tack strip, dust cover and staples. A dining seat in materials can cost about $10 to $40. Budget 10 to 20 percent extra fabric for mistakes.

Time

Beginners usually take two to three times as long as a professional. A first sofa can take 40 to 80 hours or more. For how professionals spend their hours, see the labor time chart.

Professional labor is typically $50 to $100 per dining seat and $800 to $2,000 per sofa, with fabric extra. Labor is usually the largest part of a professional bill.

Good DIY projects and jobs for a pro

Good first projects include:

Leave these to a professional:

  • Sofas with sewn cushions
  • Deep tufting
  • 8-way hand-tied springs
  • Leather

Complex pieces often end with a call to a pro anyway, so it’s worth checking the piece before you start.

Common reupholstering mistakes

  • Skipping the frame check. New fabric won’t fix a sagging seat. Springs and foam may need work first.
  • Cutting panels to exact size. Leave 2 to 4 inches for stapling, or the panels will be too short.
  • Mixing dye lots. Buy all the fabric at once.
  • Leaving foam bare. Wrap it in batting, or the fabric wears and the seat looks lumpy.
  • Doing one section. On a sectional, new fabric rarely matches faded old fabric on the rest.

For how to measure fabric for a project, see how to calculate how much fabric you need.

Is DIY cheaper?

It can be, but DIY isn’t free labor. If you value your time, or if you have to redo mistakes, the savings shrink. Compare the material and tool costs with a shop’s labor quote for the same piece, and count your own hours.

Safety

  • Wear eye protection when using a staple gun and when pulling staples.
  • Keep your fingers clear of the nose of a pneumatic stapler. Disconnect the air supply before clearing a jam.
  • Wear a dust mask when stripping old pieces. Old foam, horsehair and moss shed a lot of dust.

For the full pricing picture, see the upholstery cost pricing chart.

The complete guide to cost and yardage

Upholstery Cost: Pricing Chart for Reupholstering Furniture
Read the guide

Keep exploring

Guides from other topics

All topics →