Cost and Yardage

How Much Does It Cost to Reupholster a Dining Chair?

Typical US costs to reupholster a dining chair, from a drop-in seat to a full seat-and-back job, with fabric yardage and a DIY option for drop-in seats.

On this page
  1. Typical costs by type
  2. Fabric for a dining chair
  3. What raises the price
  4. Drop-in seat or full job?
  5. DIY a drop-in seat
  6. Fabric for dining chairs

A professional drop-in seat usually costs about $50 to $100 in labor, and a full seat-and-back chair about $100 to $250. Fabric is extra. Prices vary by region and by shop, and basic seat-only jobs or high-end studio work can fall outside these ranges.

Typical costs by type

  • Drop-in seat only: $50 to $100 per chair, labor only.
  • Seat and back: $100 to $250 per chair.
  • Fully upholstered (Parsons-style) chair: $200 to $400 or more.
  • High-end studios and complex designs: can run higher, often excluding fabric.

Shops often discount sets of four to eight chairs, and many have a minimum charge for any job.

Fabric for a dining chair

  • Drop-in seat: about 0.5 to 0.75 yard per seat.
  • Seat and back: about 1 to 1.5 yards.

One yard of 54-inch fabric often covers two standard drop-in seats, depending on seat size. Chairs with taller or fully upholstered backs need more. One shop’s published guide lists 1.5 to 3.5 yards for dining chairs, depending on style, so check with your upholsterer. For other pieces, see the upholstery yardage chart.

What raises the price

  • Scope: replacing worn foam, adding welt or piping, adding nailheads, or fixing a loose wooden frame all add cost.
  • Chair design: flat seats cost less than curved backs, spindles, arms or tufting.
  • Labor rates and location: labor rates vary by region and shop.
  • Fabric: commonly $25 to $60 or more per yard at standard shops, and much more for designer textiles.

Drop-in seat or full job?

Many dining chairs have a drop-in seat that comes off with four screws underneath. If only the seat is worn, a drop-in seat recover is much cheaper than a full job. Check the seat’s underside and frame before you decide.

DIY a drop-in seat

A drop-in seat is one of the easier projects for a beginner. Budget about $10 to $40 per chair in materials, and plan on 30 to 60 minutes per seat once you’ve practiced.

You’ll need a staple gun, a staple remover, a screwdriver and scissors. Use 1 to 2 inches of high-density foam, with 2 inches common. Wrap the foam in batting, because bare foam wears through fabric and looks lumpy.

  1. Remove the seat by taking out the four screws underneath.
  2. Strip the old fabric. Remove dirty, damaged or bulky layers, but don’t worry about every thin layer.
  3. Replace the foam and wrap it in batting.
  4. Center the fabric, then staple the middle of each side first.
  5. Fold and staple the corners, with staples about 1 to 1.5 inches apart.
  6. Add a dust cover to the underside.

Measure the recess in the chair frame before you buy thicker foam. Foam that is too thick can stop the seat from sitting back into the frame.

Fabric for dining chairs

Dining chairs take a lot of use, so choose a durable fabric. A rating around 15,000 double rubs is commonly treated as heavy-duty for household use. Delicate fabric wears quickly on a dining seat.

Wear eye protection when pulling old staples.

For a full picture of professional and DIY costs, see DIY vs professional reupholstering. For the pricing of other pieces, see the upholstery cost pricing chart.

The complete guide to cost and yardage

Upholstery Cost: Pricing Chart for Reupholstering Furniture
Read the guide

Keep exploring

Guides from other topics

All topics →