For seat cushions used every day, 1.8 lb/ft³ is a common minimum. High-resilience foam, at 2.5 lb/ft³ or more, lasts longer and is the better choice for heavy use. Back cushions carry less load, so a lower density can be acceptable there. Density and firmness are different things, so check both before you buy.
What foam density means
Foam density is the weight of one cubic foot of foam, written as lb/ft³. For comparison, 1 lb/ft³ is roughly 16 kg/m³. Most seat cushions for home furniture fall between about 1.5 and 2.5 lb/ft³.
Density is a guide to durability. Higher-density foam generally resists sagging and breakdown better over time.
Density is not firmness
Firmness comes from the foam’s indentation rating, ILD or IFD. This is the force needed to compress the foam a set amount, usually 25%. As a rough guide:
- 20 to 30: soft
- 30 to 40: medium
- 40 to 50: firm
- 50 and up: extra firm
Scales vary by maker, so compare numbers only within one brand’s figures. Dense foam can feel soft, and light foam can feel firm. Some retailers market low-density foam as “extra firm,” so do not judge quality by feel alone.
Foam grades explained
- Below about 1.8 lb/ft³. Conventional foam, typical of lower-priced furniture. A seat under about 1.5 lb/ft³ tends to soften and sag within a few years.
- About 1.8 to 2.4 lb/ft³. High-density (HD) foam, common in mid-range furniture.
- 2.5 lb/ft³ and up. High-resilience (HR) foam. HR foam is also defined by a support factor (the ratio of 65% to 25% IFD) of about 2.4 or higher, and it returns to its shape faster.
Seats vs backs
- Seats. Use at least 1.8 lb/ft³. For the best durability, use HR foam at about 2.5 to 2.8 lb/ft³ or more.
- Backs. 1.2 to 1.8 lb/ft³ is usually adequate, since backs carry less load.
- Heavy use. For heavy users or busy family sofas, HR foam at 2.8 lb/ft³ or more, with an ILD of 35 to 45 or higher, is a common choice.
Seat foam is usually 4 to 6 inches thick. Thinner foam needs a higher firmness rating, so it does not bottom out.
Other foams
- Memory foam. Usually 3 to 5 lb/ft³ or more, but slow to recover. Use it as a thin top layer, not as the whole seat.
- Latex. Often denser than polyurethane, around 4 to 6 lb/ft³ (figures vary). It is durable and heavier, and it costs more.
- Outdoor foam. Reticulated (open-cell) foam dries quickly, and it is rated by its own grades.
Foam is often wrapped in 1 inch of Dacron batting for a softer crown and a fuller cover.
How to ask a seller
- Ask for the actual lb/ft³ figure and the ILD. “High density” on its own is a marketing term.
- Ask whether the foam is in the seat or the back.
- Ask for the figures in writing.
Lifespan depends on use and care, so treat any fixed number of years with caution.
Common misconceptions
- High density does not mean firm.
- Memory foam is not the best seat foam for a sofa.
- Heavier foam is not always worth it in back cushions.
For re-foaming a cushion, see how to replace foam in sofa cushions. For checks you can make in a showroom, see how to tell if a sofa is well made.