Frames and Construction

Reupholstering Rattan Furniture

Reupholstering rattan furniture: why not to staple into rattan, how to measure curved seats, and choosing foam and fabric for each location.

On this page
  1. Rattan, wicker, and bamboo
  2. Why you shouldn’t staple into rattan
  3. Measure the seat recess
  4. Choose foam and fabric for the location
  5. Build the cushion
  6. Prep the rattan first
  7. Can rattan outdoor furniture be repaired?
  8. Common mistakes

Reupholstering rattan furniture usually means re-covering or re-foaming the cushions and a separate seat board, not the rattan itself. Rattan is a rigid, solid-core material, and it does not hold staples or tacks well. With the right approach you can refresh a chair or sofa and keep the rattan in good shape.

Rattan, wicker, and bamboo

These names get mixed up:

  • Rattan is a solid-core climbing palm, mainly from the Calamus genus.
  • Bamboo is hollow.
  • Wicker is a weaving method, not a material. Wicker can be made from rattan, cane, paper fiber, or synthetic resin.
  • All-weather wicker is usually synthetic resin (HDPE or PVC), not rattan.

Care depends on the material, so identify what you have before you choose products.

Why you shouldn’t staple into rattan

Do not staple or tack straight into rattan poles. The rattan can split, and the wraps can unravel. Instead:

  1. Upholster a separate plywood seat board, or a cushion.
  2. Fix the board to the frame with screws into wood blocks, or secure it with ties.

Many rattan seats are curved, T-shaped, or tapered, so the board or cushion has to follow that shape.

Measure the seat recess

Make a paper template of the seat recess, and transfer its shape to the board or foam. Take the measurements from the frame recess, not from the old cushion, because the old cushion may no longer match the frame.

Papasan cushions are round and often about 44 to 52 inches across, though this varies by bowl.

Choose foam and fabric for the location

  • Indoors or in a sunroom. Use high-density or high-resilience polyurethane foam, wrapped in Dacron. If sunlight reaches the piece, use a UV-resistant fabric.
  • On a covered porch. Use reticulated foam, which is open-cell and dries quickly, with solution-dyed acrylic or olefin fabric.

Use breathable covers, and avoid sealed plastic, which traps moisture.

Build the cushion

  • Thickness. Seat cushions are usually 3 to 6 inches thick, and back cushions 2 to 4 inches. Thickness varies by piece.
  • Edges. Welted (piped) edges give a neat finish.
  • Covers. Zippered covers make cushions easier to remove and clean.
  • Grip. Add ties, Velcro tabs, or non-slip backing so the cushions do not slide.

Prep the rattan first

  • Repair loose binding cane with wood glue and small brads or pins before you cover anything.
  • Clean the rattan and let it dry fully before you add new cushions. Trapped moisture causes problems.

Can rattan outdoor furniture be repaired?

Small repairs are often possible. Loose binding can be glued and pinned, as described above. Larger breaks in the rattan are beyond what a home re-cover can fix, so ask a furniture restorer or a rattan specialist for those.

Common mistakes

  • Treating rattan and wicker as the same material.
  • Putting natural rattan in uncovered outdoor spots, even with outdoor fabric.
  • Measuring cushions from the old cushion instead of the frame recess.
  • Stapling into the rattan poles.

For care after you re-cover, see how to protect rattan furniture.

The complete guide to frames and construction

How Upholstered Furniture Is Built: Frames and Construction
Read the guide

Keep exploring

Guides from other topics

All topics →