Frames and Construction

How to Replace Foam in Sofa Cushions

Replace sofa cushion foam by measuring the empty cover, choosing the right density and firmness, wrapping the core in batting, and inserting it snugly.

On this page
  1. Check the frame first
  2. Measure the cover, not the old foam
  3. Choose the foam
  4. Size the new foam
  5. Cut the foam
  6. Wrap the core in polyester batting
  7. Insert the new core
  8. Top up instead of replacing
  9. Safety and buying
  10. Common mistakes

To replace the foam in a sofa cushion, remove the old core, measure the empty cover, buy or cut new foam slightly larger than the cover, wrap it in polyester batting, and slide it in. Choose the density for durability and the firmness for feel. Check the frame first, because new foam will not fix sagging springs or webbing.

Check the frame first

Press down on the sofa deck or the springs before you buy foam. If the base sags, repair it first. A new core on a sagging base will sag too.

Measure the cover, not the old foam

Old foam shrinks and loses its shape, so measure the cover itself:

  • Measure the inside, seam to seam, for length and width.
  • Measure the boxing depth, which is the thickness of the cushion.
  • Pull the cover slightly for accuracy, or measure the empty cover.

Copying the old foam’s measurements gives cushions that come out too small.

Choose the foam

  • Thickness. Seat cushions are usually 4 to 6 inches thick. Back cushions are often thinner or softer.
  • Density. For seats, use high-density foam, at least about 1.8 to 2.0 lb/ft³. High-resilience (HR) foam, about 2.5 to 2.8 lb/ft³ or more, lasts longer. Foam under about 1.5 lb/ft³ tends to sag within a few years.
  • Firmness. For seats, an ILD of roughly 30 to 45 is a common range. For backs, roughly 18 to 25. Scales vary by supplier.
  • Memory foam. A poor choice as the only seat core. It is slow to bounce back and can feel warm.

Density and firmness are different things. The guide to foam density for sofa cushions explains the difference in more detail.

Size the new foam

Cut the foam about 1/2 inch larger than the cover in length and width. This gives a full, snug fit. Some people use 1/4 inch instead.

Cut the foam

  • Mark the cut lines with a marker and a straightedge.
  • Use an electric carving knife or a foam saw.
  • Keep the blade vertical so the edges stay square.
  • For curved or T-shaped cushions, use the old cover or kraft paper as a template.

Wrap the core in polyester batting

Wrap the foam in polyester (Dacron) batting, about 1 inch thick, covering the top, bottom, and front. Hold it in place with spray adhesive. The wrap gives a softer, rounder edge and fills out the cover.

Insert the new core

  1. Unzip the cover carefully, so you do not tear the seams or snap the pull.
  2. Slip the foam into a thin plastic bag, or vacuum-compress it, then fold it lengthwise.
  3. Slide the bag into the cover, then pull the bag out.
  4. Square up the corners and seams. Zip the cover closed without catching the batting in the teeth.

Zippers are usually on the back boxing. Some covers are sewn closed, in which case you will need to unpick a seam to insert the foam and then close it again.

Top up instead of replacing

If the core is still sound but has lost loft, add a 1-inch layer of batting or a new Dacron wrap to restore fullness. This will not fix a broken core.

Safety and buying

  • Buy foam that meets TB 117-2013 or 16 CFR 1640, where that applies.
  • Use spray adhesive in a ventilated space.
  • Foam is flammable. Keep it away from open flame and heat sources.

Common mistakes

  • Copying the old foam’s size rather than measuring the cover.
  • Treating density as firmness. Ask for both figures.
  • Using memory foam as the only seat core.
  • Adding foam to a sagging frame.

For choosing a density, see what foam density is best for sofa cushions. When you are shopping for a sofa, how to tell if a sofa is well made covers how to check its cushions.

The complete guide to frames and construction

How Upholstered Furniture Is Built: Frames and Construction
Read the guide

Keep exploring

Guides from other topics

All topics →