Frames and Construction

How to protect rattan furniture?

Keep rattan furniture out of sun, heat, and soaking water. Learn gentle cleaning, breathable covers, finish care, and early signs of mildew or pests.

On this page
  1. Identify your rattan first
  2. Keep it out of direct sun and heat
  3. Shelter it from the weather
  4. Clean without soaking
  5. Finishes and oils
  6. Mildew and pests
  7. Protect the feet and seats
  8. Common mistakes

To protect rattan furniture, keep it out of direct sun and away from heat sources, shelter it from rain and standing water, and clean it gently. Natural rattan is not weatherproof, so a covered porch is the most it should handle outdoors. Synthetic (PE) rattan tolerates more, but it still needs UV protection and gentle cleaning.

Identify your rattan first

  • Natural rattan is a solid-core palm. It does best in dry, shaded, moderate conditions.
  • Synthetic (PE) rattan is plastic. It cleans with mild soap and needs UV protection.
  • Wicker is a weave, not a material. “All-weather wicker” is usually synthetic resin.

Check the label, or ask the seller, before you choose any products.

Keep it out of direct sun and heat

Direct sun fades rattan and dries it out. Keep it away from radiators, heat vents, and fireplaces, because dry heat makes rattan brittle and can crack it. Moderate humidity suits it, roughly 40 to 60%. Air that is too dry cracks it, and air that is too damp can cause mildew or swelling.

Shelter it from the weather

  • Use shade from covered patios, pergolas, or umbrellas, especially during the hottest hours.
  • Cover idle pieces with breathable covers. Avoid sealed plastic, which traps moisture.
  • Bring natural rattan indoors during winter or wet seasons.
  • Store cushions out of direct sun and rain when they are not in use.

Clean without soaking

  • Vacuum with a soft brush attachment.
  • Wipe with a damp cloth and mild soap, then dry fully.
  • Do not soak rattan or hose it down.
  • Test any product on a hidden spot first.
  • Some restorers recommend an occasional light damp wipe to help prevent brittleness, although practice varies.

Finishes and oils

  • Protective finishes. Clear lacquer, shellac, polyurethane, and spar varnish are common. Recoat when the finish dulls or wears. On a covered porch that is often every one to two years, though it varies.
  • Oils. Boiled linseed or lemon oil can darken rattan and attract dust. Test on a hidden spot before you use it more widely.
  • Sealing is not waterproofing. A finish helps, but it does not make rattan waterproof.

Mildew and pests

  • Mildew. Wipe with diluted white vinegar or a mild bleach solution, rinse lightly, and dry the piece in the shade. Test on a hidden spot first, since bleach can change how natural rattan looks.
  • Pests. Small round holes and fine powder can be a sign of powderpost beetles. Isolate the piece, and get advice on treatment before you use general pest products.

Protect the feet and seats

  • Put felt pads or glides on the feet. They stop floor moisture from wicking up, and they keep the leg wraps from fraying.
  • Use cushions to reduce wear on woven seats.
  • Do not stand on rattan seats.

Common mistakes

  • Treating rattan and wicker as the same material.
  • Assuming a sealant makes rattan waterproof.
  • Using natural rattan in uncovered outdoor spots, even with outdoor fabric.
  • Covering rattan with sealed plastic.

For re-covering rattan cushions and seat boards, see reupholstering rattan furniture.

The complete guide to frames and construction

How Upholstered Furniture Is Built: Frames and Construction
Read the guide

Keep exploring

Guides from other topics

All topics →