To fix a tear in upholstery fabric, first work out what kind of damage you have. A split seam is re-stitched. A tear in the middle of a panel is usually backed with a patch and glued. A large or worn-through area often means replacing the whole panel. Avoid super glue, ordinary sewing thread and iron-on patches on synthetic fabric or vinyl.
Assess the damage
Look at the damage closely before you pick a repair:
- Seam split. The stitching has come apart along a seam.
- Body tear. The fabric has torn in the middle of a panel.
- Worn-through area. The fabric has thinned or broken through, often on a high-wear spot such as an arm.
Blot the area clean before you start. Glue will not bond to dirty or oily fabric, so remove the grime first.
Trim loose threads and seal the edges
Trim loose threads with scissors. Do not pull them, because pulling spreads the damage. If the edges are fraying, seal them with an anti-fray liquid. Test the liquid on a hidden spot first, since it can change the color or feel of some fabrics.
Fix a seam split
- Use a curved needle, about 3 inches long, and upholstery thread that matches the fabric.
- Stitch with a ladder or slip stitch. Catch each side of the seam alternately, with stitches about 1/8 to 1/4 inch apart.
- Pull each stitch snug, but not so tight that the seam puckers.
Ordinary sewing thread is too weak for upholstery seams. Use a thread made for upholstery.
Patch a tear in the body
A tear in the middle of a panel needs backing. Stitching straight through the middle of a tear without backing usually tears again.
- Slide a backing patch of canvas or interfacing under the tear. Tweezers help you position it.
- Apply flexible fabric glue to the patch, not the fabric.
- Press the edges of the tear together over the patch.
- Weight the area and let the glue cure, following the label directions.
Canvas or interfacing is a good backing for most fabrics. Cut the patch slightly larger than the tear, so it has room to hold.
Choose the patch fabric
If you need a matching patch, cut it from a hidden area. Good options include the back of the skirt, the excess fabric stapled under the frame, or the deck if it is covered in the same fabric. These areas can give you a close match in color and texture.
Iron-on patches
Iron-on patches suit heat-tolerant fabrics only. Test the heat on a hidden area first. The heat can melt synthetic fabrics and vinyl that looks like leather.
Leather and vinyl
Leather and vinyl need a repair kit made for them. For leather, see how to repair cracked leather furniture. These kits often include a sub-patch, a flexible filler and a colorant. Some vinyl compounds need heat to cure, so follow the kit’s directions closely. Test any heat tool on a hidden area first, because vinyl scorches easily.
When to replace the panel
A large tear, or an area that has worn through, is often better handled by replacing the whole panel. That means unstapling the panel, cutting a new one from a pattern, and stapling it back in place. The recliner guide shows how sewn panels come off a more complex piece.
What not to use
- Super glue. It dries hard, and it can discolor fabric.
- Ordinary sewing thread. It is too weak for upholstery seams.
- Iron-on patches on synthetic fabric or vinyl. The heat can melt them.
- Stitching through a tear without backing. The stitches tend to pull through and re-tear the fabric.
Safety
Use glues and leather compounds with good ventilation. Test any heat tool on a hidden area first.
Frequently asked questions
Can you fix a tear without sewing? A body tear can often be fixed with a backing patch and flexible fabric glue, with no sewing. A split seam needs stitching, because glue alone will not hold a seam under strain.
Is it worth fixing a small tear? Usually, yes, because small tears are quick to fix. Large or worn-through areas may be better handled by replacing the panel. The complete guide to reupholstering furniture explains when a full reupholstering job makes more sense.